PERANCANGAN PELACAK CAHAYA MATAHARI UNTUK PANEL SURYA BERBASIS WAKTU DI DESA MUARA SIKABALUAN KECAMATAN SIBERUT UTARA MENTAWAI
Keywords:
Time Based Solar Panel, Time based Sun position detectorAbstract
People's need for electrical energy is getting bigger along with the development of technology and population. To meet this increasing demand, it is necessary to develop energy resources. Solar energy is an effective sustainable natural resource, because of its existence, availability, and sustainability, which are adequate and free from pollution. Solar energy can be used to produce electrical energy by using solar panels. The use of solar panels as a necessity for electric current has been widely applied, but of course there is still a static position that makes solar panels ineffective in getting sunlight which will be converted into electric current used. The purpose of this study is to make a solar panel controller that can move in the direction of the sun's position with a time-based method, so that the position of the solar panel is always facing the sun even though the sun's position is covered by clouds or obstacles, which makes solar panels store more solar energy as a source of energy. community needs in using electrical energy. The solar panel is connected by using a screw iron that uses a nut to connect it to the stepper motor, then the movement of this stepper motor will be controlled every 20 minutes using the A4988 Stepper Motor Driver, in addition to the rotation of the motor as a driving force for the direction of the solar panel..
References
K. Resi. 2015, “Pembuatan Penggerak Panel Surya untuk Mengikuti Gerak Matahari dengan Menggunakan Logiza Fuzzy,” J. Otomasi Kontrol dan Instrumentasi.
I. W. Sutaya dan K. U. Ariawan, “Solar Tracker Cerdas dan Murah Berbasis Mikrokontroller 8 BIT ATMega8535,” vol. 5, no. 1, hal. 683–696, 2016.
Fadhlullah, K., 2017, “Rancang Bangun Solar Tracking System Berbasis Arduino”, http://repositori.uin-alauddin.ac.id/id/eprint/4355
Feri Djuandi, 2011, “Pengenalan Arduino”, http://103.178.17.35/moodle/pluginfile.php/4485/mod_resource/content/1/Arduino-Pengenalan.pdf.
Eka Samsul, 2019, “Motor Stepper : Prinsip Kerja dan Pengendalian pada Otomasi Industri”, http://jagootomasi.com/motor-stepper-prinsip-kerja-dan-pengendalian-pada-otomasi-industri/
Agus Faudin, 2017, “Tutorial Arduino Mengakses Modul RTC DS3231”, https://www.nyebarilmu.com/tutorial-arduino-mengakses-module-rtc-ds3231
Published
How to Cite
Issue
Section
Copyright (c) 2022 BUSRAN, Satria Yaumil

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.